ANCHOR 4300
Locks with block or hook bolts are usually used on boltworks. Until now, however, not every boltwork was suitable for every bolt shape. The choice of lock had to be matched to the boltwork. These special efforts inspired WITTKOPP to develop the lock ANCHOR 4300, which can be installed on deadbolts for both block and hook bolts. ANCHOR is therefore ideal for original equipment and retrofitting.
Convenient operation is another plus point. Turning the safe handle activates the bolt mechanism on locks with an anchor bolt. The boltwork pushes the lock bolt aside, allowing the cabinet to be opened immediately.
|
Bolt drive |
Indirect drive by moving the boltwork to the open or closed position |
|
Bolt design |
Spring-loaded anchor bolt, tombac |
|
Fastening |
Standard mounting dimensions, 3 screw-on points |
|
Installation positions |
Right / Left / Top / Bottom |
|
Drill protection |
Integrated |
|
Interfaces |
1 analog / 1 digital |
|
Plug connection |
Molex PICO-SPOX |
|
Power supply |
- Battery operation - External operation, e.g. via intruder alarm system (prerequisite: PrimorSIGNAL / PrimorSIGNAL+ signal box) |
ANCHOR 4300
- Universally suitable for block and swivel boltworks
- Bolt made of hard-wearing tombac for the heaviest loads
- Simplified cable routing thanks to indentation in the lock case
- Self-locking even if the power supply is tampered with
- Integrated emergency locking with drill protection
- Bolt made of hard-wearing tombac for the heaviest loads
- Simplified cable routing thanks to indentation in the lock case
- Self-locking even if the power supply is tampered with
- Integrated emergency locking with drill protection
Assembly
ANCHOR
4300
The ANCHOR 4300 uses patented long screw-on holes. During installation, the elongated holes serve to reduce the play between the latch and latch mechanism. Thanks to a special washer, the lock is fixed in place without slipping. This new and ingenious way of fixing the lock enables precise adjustment and increases the durability of the components.
| ANCHOR 4300 | |
|---|---|
|
User codes |
9 |
|
Master codes |
1 |
|
Instant opening code |
✓ |
|
Operating lock |
✓ |
|
False code lock |
✓ |
|
Dual-control principle |
✓ |
|
Opening delay time |
1 - 99 min |
|
Opening hours |
1 - 19 min |
|
Silent alarm* |
✓ |
|
Remote lock* |
✓ |
|
Audit - with date and time** |
60 |
|
Battery monitoring |
✓ |
* Prerequisite: PrimorSIGNAL / PrimorSIGNAL+ signal box
** Requirement: AnchorSELECT software (available in downloads from 05/2025) and DataCONNECT interface cable
** Requirement: AnchorSELECT software (available in downloads from 05/2025) and DataCONNECT interface cable
| Item number | Item description | PU |
|---|---|---|
|
A-4300-00-00 |
lock ANCHOR 4300, system cable |
20 |
|
CABLE-SET-DC |
DataCONNECT interface cable set |
1 |
|
P-SIGNAL |
PrimorSIGNAL signal box, Y-adapter, system cable |
5 |
|
P-SIGNAL-PLUS |
PrimorSIGNAL+ signal box, system cable |
1 |
Other products in the series
Certification
ANCHOR 4300
✓ EN 1300 B
✓ VdS class 2
✓ A2P level B
✓ IMP Class B
Field of application
Secure storage units according to
EN1143-1 Grade 0 - V
